Author Index

A

  • Abbasi, E. Predicting the Traffic Crashes of Taxi Drivers by Applying the Non-Linear Learning of ANFIS-PSO with M5 Model Tree [Volume 3, Issue 3, 2019, Pages 50-57]
  • Akbarpour, A. Prediction of Groundwater Fluctuations Using Meshless Local Petrov-Galerkin Numerical Method in a Field Aquifer (Birjand Aquifer) [Volume 3, Issue 4, 2019, Pages 33-41]
  • Amiri, T. Comparison of different numerical methods for calculating stress intensity factors in analysis of fractured structures [Volume 3, Issue 1, 2018, Pages 1-12]
  • Asgarian, B. Search and Rescue Optimization Algorithm for Size Optimization of Truss Structures with Discrete Variables [Volume 3, Issue 3, 2019, Pages 28-39]
  • Ashoori Barmchi, M. Influence of Ground Motion Duration on the Structural Response at Multiple Seismic Intensity Levels [Volume 3, Issue 4, 2019, Pages 10-23]
  • Asil Gharebaghi, S. Lateral stability analysis of steel tapered thin-walled beams under various boundary conditions [Volume 3, Issue 1, 2018, Pages 13-25]
  • Asil Gharebaghi, S. Speeding up the Stress Analysis of Hollow Circular FGM Cylinders by Parallel Finite Element Method [Volume 3, Issue 4, 2019, Pages 1-9]
  • Askari, F. Variables Characteristics Effects on Static and Pseudo-Static Reliability-Based Design of Near Slope Shallow Foundations [Volume 3, Issue 3, 2019, Pages 1-12]
  • Azimi, A. M. Seismic loss analysis of buckling-restrained braced frames considering the effects of modeling uncertainties [Volume 3, Issue 2, 2018, Pages 24-34]
  • Azizyan, Gh. Prediction of Groundwater Fluctuations Using Meshless Local Petrov-Galerkin Numerical Method in a Field Aquifer (Birjand Aquifer) [Volume 3, Issue 4, 2019, Pages 33-41]

B

  • Beheshti-Aval, SB Using FEM to achieve acceptance criteria in FEMA performance levels for FRP-wrapped RC circular columns [Volume 3, Issue 4, 2019, Pages 42-52]
  • Behzadi, S. Mapping Historical Water-Supply Qanat Based On Fuzzy Method. An Application to the Isfahan Qanat (Isfahan, Iran) [Volume 3, Issue 4, 2019, Pages 24-32]

E

  • Eslami, A. Approximation of undrained bearing capacity of strip foundations on heterogeneous marine clay [Volume 3, Issue 3, 2019, Pages 20-27]
  • Estekanchi, H. Influence of Ground Motion Duration on the Structural Response at Multiple Seismic Intensity Levels [Volume 3, Issue 4, 2019, Pages 10-23]

F

  • Feizi, A. Frequency Analysis of Concrete Gravity Dam with Finite Element Model and LHS Method [Volume 3, Issue 3, 2019, Pages 13-19]

G

  • Ghannadiasl, A. Optimization of consumed steel, opening height and location in RC beams by genetic algorithms [Volume 3, Issue 3, 2019, Pages 40-49]
  • Gharibi Asl, A. Optimization of consumed steel, opening height and location in RC beams by genetic algorithms [Volume 3, Issue 3, 2019, Pages 40-49]
  • Gholamizadeh, A. Size-dependent buckling analysis of non-prismatic Timoshenko nanobeams made of FGMs rested on Winkler foundation [Volume 3, Issue 2, 2018, Pages 35-46]

H

  • Hadji Hosseinlou, M. Predicting the Traffic Crashes of Taxi Drivers by Applying the Non-Linear Learning of ANFIS-PSO with M5 Model Tree [Volume 3, Issue 3, 2019, Pages 50-57]
  • Hajiazizi, M. Calculation of slip surface displacement in earth slopes using the limit equilibrium method [Volume 3, Issue 1, 2018, Pages 36-46]
  • Harati, M. Influence of Ground Motion Duration on the Structural Response at Multiple Seismic Intensity Levels [Volume 3, Issue 4, 2019, Pages 10-23]
  • Hashemi Monfared, S. A. Prediction of Groundwater Fluctuations Using Meshless Local Petrov-Galerkin Numerical Method in a Field Aquifer (Birjand Aquifer) [Volume 3, Issue 4, 2019, Pages 33-41]
  • Hossieny Akhgar, Y. Evaluation of Wind Effects on Super-Tall Buildings using CFD Simulation and 3D Visualization [Volume 3, Issue 2, 2018, Pages 47-56]

I

  • Izadi, A. Approximation of undrained bearing capacity of strip foundations on heterogeneous marine clay [Volume 3, Issue 3, 2019, Pages 20-27]

J

  • Jalali, M. Frequency Analysis of Concrete Gravity Dam with Finite Element Model and LHS Method [Volume 3, Issue 3, 2019, Pages 13-19]
  • Jalili Sadr Abad, M. A New Efficient Form of The Modified Energy Method (MEM) in Structural Dynamics [Volume 3, Issue 1, 2018, Pages 58-78]
  • Jamshidi Chenari, R. Approximation of undrained bearing capacity of strip foundations on heterogeneous marine clay [Volume 3, Issue 3, 2019, Pages 20-27]

K

  • Karami Mohammadi, R. Curvature Method to Detect Location and Depth of a Plastic Zone in Frame Members during an Earthquake [Volume 3, Issue 2, 2018, Pages 1-12]
  • Keyvani Borujeni, A. In-plane effect on out-of-plane capacity of separated infill wall [Volume 3, Issue 1, 2018, Pages 26-35]
  • Khaksar Najafi, E. Approximation of undrained bearing capacity of strip foundations on heterogeneous marine clay [Volume 3, Issue 3, 2019, Pages 20-27]
  • Khalaj, M. Curvature Method to Detect Location and Depth of a Plastic Zone in Frame Members during an Earthquake [Volume 3, Issue 2, 2018, Pages 1-12]
  • Khojastehfar, E. Seismic loss analysis of buckling-restrained braced frames considering the effects of modeling uncertainties [Volume 3, Issue 2, 2018, Pages 24-34]
  • Khosravi, H. Pseudo-spectral method for mechanical buckling analysis of circular plates with variable thickness made of bimorph FGMs [Volume 3, Issue 2, 2018, Pages 57-69]
  • Khosravi, M. Pseudo-spectral method for mechanical buckling analysis of circular plates with variable thickness made of bimorph FGMs [Volume 3, Issue 2, 2018, Pages 57-69]

L

  • Lezgy-Nazargah, M. Pseudo-spectral method for mechanical buckling analysis of circular plates with variable thickness made of bimorph FGMs [Volume 3, Issue 2, 2018, Pages 57-69]

M

  • Mahdi, T. In-plane effect on out-of-plane capacity of separated infill wall [Volume 3, Issue 1, 2018, Pages 26-35]
  • Mahmoudi, M. A New Efficient Form of The Modified Energy Method (MEM) in Structural Dynamics [Volume 3, Issue 1, 2018, Pages 58-78]
  • Mashayekhi, M. Influence of Ground Motion Duration on the Structural Response at Multiple Seismic Intensity Levels [Volume 3, Issue 4, 2019, Pages 10-23]
  • Mirtaheri, M. A real-time recursive dynamic model for vehicle driving simulators [Volume 3, Issue 2, 2018, Pages 13-23]
  • Mirzazadeh, Z. Calculation of slip surface displacement in earth slopes using the limit equilibrium method [Volume 3, Issue 1, 2018, Pages 36-46]
  • Moazami, D. Investigating the Rutting Behavior of Modified Asphalt Mixtures with Waste Materials [Volume 3, Issue 4, 2019, Pages 53-65]
  • Mohamadzadeh Moghaddam, A. Investigating the Rutting Behavior of Modified Asphalt Mixtures with Waste Materials [Volume 3, Issue 4, 2019, Pages 53-65]
  • Mohammadgholiha, M. Curvature Method to Detect Location and Depth of a Plastic Zone in Frame Members during an Earthquake [Volume 3, Issue 2, 2018, Pages 1-12]
  • Mohammadi, A. Stress distribution and failures in partially overloaded support-removed flat slab floors [Volume 3, Issue 1, 2018, Pages 47-57]
  • Mohri, F. Lateral stability analysis of steel tapered thin-walled beams under various boundary conditions [Volume 3, Issue 1, 2018, Pages 13-25]
  • Mohtashami, A. Prediction of Groundwater Fluctuations Using Meshless Local Petrov-Galerkin Numerical Method in a Field Aquifer (Birjand Aquifer) [Volume 3, Issue 4, 2019, Pages 33-41]
  • Mousavi, Z. Mapping Historical Water-Supply Qanat Based On Fuzzy Method. An Application to the Isfahan Qanat (Isfahan, Iran) [Volume 3, Issue 4, 2019, Pages 24-32]

N

  • Niknam, N. Speeding up the Stress Analysis of Hollow Circular FGM Cylinders by Parallel Finite Element Method [Volume 3, Issue 4, 2019, Pages 1-9]
  • Norouzi, E. Mapping Historical Water-Supply Qanat Based On Fuzzy Method. An Application to the Isfahan Qanat (Isfahan, Iran) [Volume 3, Issue 4, 2019, Pages 24-32]

P

  • Pachenari, A. Stress distribution and failures in partially overloaded support-removed flat slab floors [Volume 3, Issue 1, 2018, Pages 47-57]
  • Parsaei, M. Using FEM to achieve acceptance criteria in FEMA performance levels for FRP-wrapped RC circular columns [Volume 3, Issue 4, 2019, Pages 42-52]
  • Pasbani Khiavi, M. Frequency Analysis of Concrete Gravity Dam with Finite Element Model and LHS Method [Volume 3, Issue 3, 2019, Pages 13-19]

R

  • Rabbani-Zadeh, H. Comparison of different numerical methods for calculating stress intensity factors in analysis of fractured structures [Volume 3, Issue 1, 2018, Pages 1-12]
  • Rezaie, F. Evaluation of Wind Effects on Super-Tall Buildings using CFD Simulation and 3D Visualization [Volume 3, Issue 2, 2018, Pages 47-56]

S

  • Sabbagh-Yazdi, S.R. Comparison of different numerical methods for calculating stress intensity factors in analysis of fractured structures [Volume 3, Issue 1, 2018, Pages 1-12]
  • Sadeghi, B. Stress distribution and failures in partially overloaded support-removed flat slab floors [Volume 3, Issue 1, 2018, Pages 47-57]
  • Sahaf, A. Investigating the Rutting Behavior of Modified Asphalt Mixtures with Waste Materials [Volume 3, Issue 4, 2019, Pages 53-65]
  • Salido, M. Search and Rescue Optimization Algorithm for Size Optimization of Truss Structures with Discrete Variables [Volume 3, Issue 3, 2019, Pages 28-39]
  • Salkhordeh, M. A real-time recursive dynamic model for vehicle driving simulators [Volume 3, Issue 2, 2018, Pages 13-23]
  • Shabani, A. Search and Rescue Optimization Algorithm for Size Optimization of Truss Structures with Discrete Variables [Volume 3, Issue 3, 2019, Pages 28-39]
  • Shojaeian, A. Variables Characteristics Effects on Static and Pseudo-Static Reliability-Based Design of Near Slope Shallow Foundations [Volume 3, Issue 3, 2019, Pages 1-12]
  • Soltani, M. Lateral stability analysis of steel tapered thin-walled beams under various boundary conditions [Volume 3, Issue 1, 2018, Pages 13-25]
  • Soltani, M. Size-dependent buckling analysis of non-prismatic Timoshenko nanobeams made of FGMs rested on Winkler foundation [Volume 3, Issue 2, 2018, Pages 35-46]